Livestock Transport Directory

Choosing a Livestock Trailer: Stock, Pot and Gooseneck

The right livestock trailer depends on what you haul, how far, how often and what your truck can safely pull. The main choices are bumper-pull stock trailers, gooseneck stock trailers and semi-tractor pot-belly trailers, and each has tradeoffs in capacity, stability, cost and ease of loading.

Why it matters

A trailer is a long-term purchase, and the wrong one costs money every trip: too small and you make extra runs, too big and you cannot tow it safely, or poorly ventilated and animals suffer. Matching the trailer to the work is cheaper than replacing it.

Step by step

  1. List the animals you haul, their typical weight and how many at a time. A trailer for ten show lambs is a different tool from one for twelve mature cows.
  2. Decide between bumper-pull and gooseneck. Bumper-pulls are simpler and cheaper but handle large loads less steadily. Gooseneck trailers place weight over the truck's rear axle and tow more stably.
  3. Consider a pot-belly or hopper trailer behind a semi only if you haul full loads long distances, since it needs a commercial tractor and, often, a commercial driver's license.
  4. Check the trailer's gross vehicle weight rating, empty weight and payload, and compare them with your truck's tow rating and payload before you fall in love with a model.
  5. Look at the construction: aluminum is lighter and does not rust, steel is cheaper and often stronger, and either needs good welds, a sound floor and a smooth interior free of sharp edges.
  6. Check the gates, dividers and escape doors. Interior dividers that can be moved let you separate animals and change compartment sizes for different loads.
  7. Inspect ventilation: slats or openings along the sides and roof, with options to close part of them in cold weather.

What good looks like

A good trailer matches your truck, loads easily, has a non-slip floor, adjustable ventilation and flexible compartments, and carries your usual load without exceeding its rating. It tows straight and does not sway.

Worked example

A 24-foot gooseneck stock trailer has an empty weight of 5,200 pounds and a gross rating of 14,000 pounds. That leaves 8,800 pounds of payload. At about 1,250 pounds per cow, seven cows weigh 8,750 pounds, so the trailer is full by weight well before it is full by floor space. Anyone buying it to haul ten cows would have the wrong trailer.

Common mistakes to avoid

  • Buying on floor length alone and ignoring payload.
  • Choosing a trailer the truck can pull but cannot stop safely.
  • Skipping a floor and weld inspection on a used trailer.
  • Ignoring ventilation and the climate where you haul.

Safety, legal and compliance notes

Trailer and tow-vehicle ratings are safety limits. Exceeding them can cause brake failure, sway and loss of control. Follow the manufacturer's ratings and your state's registration and inspection requirements.

What to record

Keep a dated trip record: where and when the animals were loaded, head count and tag numbers, loading and unloading times, weather, stops, any injuries or deaths and who was told. A simple log protects you with buyers and insurers and shows inspectors that you follow the rules.

When to ask for help

Rules for health papers, identification, weight limits and driver licensing vary by state and change often. Contact your state veterinarian or department of agriculture, your state transportation agency, your extension office and your insurance agent before you haul. The state directory lists agencies and resources in every state.

Frequently asked questions

Is a gooseneck better than a bumper-pull for livestock?

For heavy or long hauls a gooseneck is usually more stable, but a bumper-pull can be fine for light loads and small animals if the truck is rated for it.

Do I need a commercial license for a stock trailer?

It depends on the combined weight rating, how the trailer is used and your state's farm exemptions, so check with your state transportation agency.

Should I buy aluminum or steel?

Aluminum is lighter and corrosion resistant, steel is usually cheaper and sturdy; choose on payload needs, budget and how well the trailer is built.

Related guides

More from the network

Farm news, humor and ranch life at farm.FM.